 |
Features
| CNPS7700-Cu |
 |
|
|
|
| |
 |
|
|
1. Zalman CNPS7700: The New Giant of Coolers www.tomshardware.com
|
| |
| Compatible
CPUs and Motherboards |
|
| |
Socket |
CPU |
Silent Mode
(1,000~1,400rpm) |
Low-noise Mode
(1,400~2,000rpm) |
Compatible Motherboard |
| Intel |
478 |
Celeron |
Supports all speeds |
Supports all speeds |
 |
| Celeron D |
| Pentium 4 |
| 775 |
Celeron D |
Supports all speeds |
Supports all speeds |
|
| Pentium 4 |
| Pentium D |
- |
| Core 2 Duo |
Supports all speeds |
| AMD |
754 |
Sempron |
Supports all speeds |
Supports all speeds |
|
| Athlon 64 |
| 939 |
Athlon 64 |
Supports all speeds |
Supports all speeds |
| Athlon 64 X2 |
| Athlon 64 FX |
| Opteron |
| Dual-Core Opteron |
| 940 |
Athlon 64 FX |
Supports all speeds |
Supports all speeds |
| Opteron |
| Dual-Core Opteron |
|
|
|
| |
1) Intel Pentium4
Socket 775/478
2) AMD Sempron/AMD64 Socket 754/939/940
*
Note : No motherboard components with a height greater than
39mm (1.53inch), as well as the
PSU, disk drives, VGA card, and RAM should be present within a 68mm
(2.68 inch)
radius from the center of the CPU. |
|
| |
| Specifications |
|
 CNPS7700-Cu
|
| |
- Dimensions |
: 136(L) x 136(W) x 67(H)mm |
| |
- Weight |
: 918g |
| |
- Base Material |
: Pure Copper |
| |
- Dissipation Area |
: 3,268 cm2 |
| |
- Bearing Type |
: 2 Ball-Bearing |
| |
- Speed |
: 1,000 ~ 2,000rpm ± 10% |
| |
- Thermal
Resistance |
: 0.19 ~ 0.24°C/W |
| |
- Noise Level |
: 20 ~ 32dB ± 10% |
|
FAN
Speed Controller (FAN MATE 2)
|
| |
- Dimensions |
: 70(L) x 26(W) x 26(H)mm |
| |
- Weight |
: 20g |
| |
- Output Voltage |
: 5V ~ 11V ± 2% |
| |
- Allowable Power |
: 6W or lower |
| |
- Connector |
: 3-Pin |
| |
※
Directions for Use |
|
|
|
| |
 |
|
1. Does not generate
noise or vibration in Silent Mode.
2. Pure Copper base material ensures excellent heat dissipation.
3. Intel Pentium 4 (Socket 775), Intel Pentium 4 (Socket 478), and
AMD64 (Socket 754/939/940)
compatible design for broad compatibility.
4. The large 120mm fan inside the FHS maximizes cooling performance
by providing sufficient
airflow even at slow rotation speeds.
5. The large 120mm fan provides air flow over a large area, cooling
not only the CPU, but the
VGA card, Northbridge, FET, and RAM.
6. The adjustable fan speed controller (FAN MATE 2) enables control
of noise and fan performance. |
| |
 |
| |
 |
|
 |
Common
Components
1) Heatsink Assembly (CNPS7700-Cu)
2) Four Grips (2 each for S-Type and L-Type)
3) Four Bolts
4) Thermal Grease
5) Fan Speed Controller (FAN MATE 2)
6) Double-sided Tape (for installing FAN MATE 2)
7) Cable for FAN MATE 2
8) User's Manual - in English and Korean |
Components
for Intel Pentium 4 (Socket 775)
9) One Clip Support for Socket 775
10) One Backplate for Socket 775
11) Four Clip Support Fixing Bolts |
|
| |
 |
Components
for Intel Pentium 4 (Socket 478)
12) Two Clip Supports for Socket 478 |
Components
for AMD Sempron/AMD64
(Socket 754/939/940)
13) Two Nipples
14) One Backplate for AMD64
15) One set of Washers |
|
|
|
| |
 |
|
|
1. 7700 Awarded by Germany magazine PC Games Hardware
|
| |
 |
|
Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for
noiseless computers. |
| |
 |
|
1. Korean Patent Application No. 00-54635
2. Korean Design Application Nos. 04-16030, etc.
3. Patents pending in over 20 nations around the world, including the USA, EU, and Japan. |
| |
 |
|
1. Fan should be set to Normal Mode if OVERCLOCKING.
2. Zalman Tech Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING.
3. The maximum weight for a cooler is specified as 450g for Intel Socket 775/478 and AMD Socket
754/939/940. Special care should be taken when moving a computer equipped with a cooler which
exceeds the relevant weight limit. Zalman Tech is not responsible for any damage that occurs
when moving a computer. |
|
|
|
 |
|
 |
|
|
|
